Categories
Contact Us
Home > INKJET PRINTABLE PVC SHEET > PVC COATED OVERLAY (Oil Solvent)

PVC COATED OVERLAY (Oil Solvent)

  • Product Detail
  • Other Products
  • Send Inquiry
Brief Introduction:

PVC Coated Overlay is specially designed for high-end card production industry. It has better performance than other similar products.

Characteristics：

The adhesion solvent of this PVC coated overlay is oil-based material. It has better adaptability to various inks. It features much longer aging time and higher peel strength. It is quite suitable for laying magnetic stripes on its surface with dry coating surface. It can ensure better legibility of anti-fake marks on card surface.  It is environmentally friendly without abnormal smells.   

Technical Parameters：
Item Parameters
Vicat softening point               　　 72±2 ℃
Heating Shrinkage ratio            　　 ≤10 %
Tensile Strength         ≥40 MPa
Thickness in mm 0.04，0.05，0.06，0.08，0.10
Peel Strength (90°, 300mm/min)            ≥8.0 N/cm
Aging time (65℃/95% humidity) 700 hours
　Suitable ink Various inks
Product Category and Laminating Condition:
Application Various cards including bank card ssuchas debitcards, creditcard,etc
Recommended  Laminating  Condition Laminationunit Heat  Laminating Cool  Laminating
  Temperature 130~150℃ ≤25℃
  Time 30min 10min
  Pressure ≥5MPa ≥5MPa
Packaging:

• They are packed with PE film bag and carton. 
• 500 pcs or 1000 pcs are packed in one bag and 3, 4 or 5 bags are packed in one carton.

Storage:

• Keep package sealed and moisture-proof, room temperature under 40℃.　 
• Keep it horizontally, avoid heavy pressing and direct sunlight.　
• Shelf life: One year.